These lights were designed from the ground up to improve your daily grind.Unlike other lights, Sparse lights integrate onto your bike.They have been engineered to the highest performance specifications and behave as a component of your bicycle.
The chassis of the lights is cast zinc.
The metal chassis is joined by polycarbonate lenses, sealed with a silicone gaskets and is on installation, locked into the bike.
The lights won't jostle, rattle, or interfere with your cables.
They're solid, sealed, tamper-resistant, and stupidly bright.
The Tail Light has 3 modes, On, Off, and blink.
The Post Light slips over and clamps onto your seat post.
The light fits the most common seat post sizes - anything from 27.2mm - 31.9mm.
There is no way to remove the light without removing the seat post.
The source of illumination in the Post Light is a series of board-mounted red LED's -2 face rear and 2 to the sides. In total, they add up to 2 Watts of output (100 Lumens).
Both lights are fueled by a rechargeable Lithium Polymer battery like the one in your phone.
The charge is designed to last a minimum of 4 hours - enough to get youto and from work for a week.
At that point, you park the bike in the vicinity of an outlet and refill the battery.
We're shipping the lights with a 6' micro-USB cable and a region-specific wall-adapter.
||42mm W x 108mm L x 40mm D
||162g (with battery)
||2 Watt Red Four-LED by Cree
||Lithium Polymer rechargeable battery
|| 4 hrs
|| 8 hrs
|| 4 hrs (USB recharge)
|| IP4 rating
|Standard round / Non-Aero
|27.2mm to 31.9mm diameter (Ships with adapter shim)